Our Top Selling Jack Stands for This Quarter. Click On the Images Below For Full Details

The Bestselling Jack Stands for This Quarter. Please Take a Look at the Side Menu for the Full Range of Models.

 
 

Don’t Know What Type You Need? View All the Models Available HERE.

 
 
We work in association with a super site to offer car and jack stands for SUV’s at true bargain prices – view the prices on competing websites and you will find that they cost more for less features!

{ 19 comments… read them below or add one }

Randall Bryant April 2, 2012 at 12:23 am

i would like get one of this jacks and i dont know whre ask for it, the way to pay for it, and the way to bring it? to mexico city, can you help`me?

Rick Mcknight April 4, 2012 at 7:22 am

Awesome! I hope I can get one of those jacks some day. ? I can say with confidence, though, that if I ever do, my awesome wife will probably be the one to buy it for me!

yodude April 4, 2012 at 8:23 am

I have some work to do under my car and only have one trolley jack which will need to be used later to support my gearbox. Is it safe to allow the car to rest on two axle stands alone while working underneath?.

nuke7 May 19, 2012 at 4:42 am

the place is pretty secure, I’m just concerned if the jack stands are reliable enough to withstand that amount of time.. . What do you think?.

bigdude1 May 27, 2012 at 10:41 am

For example, when a girl rides the axle pegs on a guy’s bike (I read it in the book “”Carter Finally Gets It”"), do you stand on the axle pegs of the back or the front?.

Edmundo Bailey September 11, 2012 at 5:53 pm

dave, what about if i need? to change the complete front end(forks and triple trees)…i cant use the new front stand in that case because the lower triple is being removed as well.. . do i need jack stands that lift at the frame sliders in the front? so the pit bull jack stands wont work for me right?

Elmer Ryan September 18, 2012 at 9:13 pm

i have a few jacks and engine lifts out in my garage, one was out all winter last year, doesn’t work anymore. just wondering if it is safe to keep them in the garage all winter, non heated garage..

saab5 October 30, 2012 at 4:19 pm

How long can a car repair shop legally keep a car?

coke7 November 3, 2012 at 3:26 pm

Just to help some one out, jack the car up from the sub-frame, its located about a foot in from the jack spots (the ones on the side skirts). And? if you’re using jackstands place them where you would normally place the jack.

yoda0 December 18, 2012 at 6:34 am

I am looking for a car service center / repair service station in the area of Model Town, Ashok Vihar, Kingsway camp or near GT Kernal Road. I need to get complete car check up for my three vehicles – Honda and Hyundai and Maruti..

Rodger Bass December 18, 2012 at 6:34 am

Need HELP! How do I safely install coil springs in a Chevy sub-frame that is off of my body on jack stands?

convex2 February 20, 2013 at 9:29 am

I dont want to damage the underside of the car, Where is the best place to put axle stands under neath the car? Is it ok under the Chasis?.

Hai Stuart March 18, 2013 at 7:27 am

i agree. the last episode hardly raps? anything up. i was so pissed off when the last episode aired and jack didnt get back to the past.

Myles Larsen March 22, 2013 at 6:22 pm

How expensive to lift an old house to put foundation under it?

Von Mccray March 22, 2013 at 6:22 pm

That was along time ago and i had them under there for only a few days. I have jack stands under my baby? now lol thank you for your concern.

qwertyui April 7, 2013 at 10:23 am

All jacks are inherently unstable, that’s why you ALWAYS USE AXLE-STANDS. When used correctly on a clean, dry & level surface the bottle jack is extremely reliable on straight lifts. Keep in mind that the load may shift on higher/longer lifts. A round surface like a differential housing will sit secure in the ? X grooves on the jack-pad but as you get higher the load will wander away from the jack. Block it in stages or get a “”Floor-Jack”" – more $ but the wheels will? self-center under the load.

ronin2 April 19, 2013 at 1:08 pm

The reason they do that is to prevent idiots from unbolting the center top nut while the strud is mounted on the car and having? the whole thing blowup in your face. Its extremely dangerous to do this yourself.

Darwin Dunlap April 24, 2013 at 4:20 am

What are some reasons a car repair shop would need the money when i drop off my car to get worked on?

Ariel Bond May 6, 2013 at 3:21 am

How do I separate the axle from the tranny? HELP?

Leave a Comment

Spam Protection by WP-SpamFree

Previous post:

Next post: